Hydraulic Oil 150AW
Hydraulic Oil 150AW is a fully formulated premium type Hydraulic Oil suitable for severe duty hydraulic service.
Hydraulic Oil 150AW is manufactured from the highest quality anti-wear additives available for extended oil life and pump durability. It also contains anti-rust, anti-foam and de-emulsifying additives to help extend oil life and protect metal components in severe duty service, where water contamination may be a problem.
Typical Analysis:
ISO Viscosity Grade: 150
Viscosity @ 40° C: 150 cSt
Viscosity Index: 100
API Gravity: 30.0
Specific Gravity: 0.886
Flash Point COC: 212 °C
Pour Point: -15 °C
Rust Protection ASTM D665: Pass
Colour ASTM D1500: 4 Maximum
Hydraulic Oil 100AW
Hydraulic Oil 100AW is a fully formulated premium type Hydraulic Oil suitable for severe duty hydraulic service.
Hydraulic Oil 100AW is manufactured from the highest quality anti-wear additives available for extended oil life and pump durability. It also contains anti-rust, anti-foam and de-emulsifying additives to help extend oil life and protect metal components in severe duty service, where water contamination may be a problem.
Typical Analysis:
ISO Viscosity Grade: 100
Viscosity @ 40° C: 100 cSt
Viscosity Index: 100
API Gravity: 30.0
Specific Gravity: 0.888
Flash Point COC: 207 °C
Pour Point: -15 °C
Rust Protection ASTM D665: Pass
Colour ASTM D1500: 4 Maximum
Hydraulic Oil ‘R’ Series
E360S offers a full range of ‘low cost’ anti-wear Hydraulic Oils based on ‘previously used’ hydraulic oils.
The oils used to manufacture these oils have been collected from leaking hydraulic systems and have been kept completely separate from all other ‘waste oils’. They are tested for contamination with other products before we reclaim them, to ensure that only hydraulic oils are included in this process stream. The oils are reclaimed to better than new cleanliness levels and the additive levels are brought to a higher than ‘new’ level with a high grade full additive package. Viscosity adjustment if needed, is by blending
virgin base stocks as needed. Samples of each production batch are sent to an ‘independent’ outside consulting laboratory for full analysis to ensure that there is a full additive package present and that there is no sign of any oil oxidation. These oils carry the same guarantee as our ‘New Oils’ made from virgin base stocks.
These oils contain additives to protect against oxidation, rusting, anti-wear, anti-foam and de-emulsifiers to aid in water separation. They all meet or exceed specifications developed by machine builders such as Cincinnati Milacron, Vickers, Denison and others.
Typical Analysis
| ISO Viscosity Grade | 32-R | 46-R | 68-R | 100-R |
| Viscosity at 40 °C | 29 – 35 cs | 41 – 51 cs | 61 – 74 cs | 90 – 110 cs |
| Viscosity Index | 95 min | 95 min | 95 min | 95 min |
| Specific Gravity | 0.86 | 0.87 | 0.89 | 0.90 |
| Flash Point COC | 380 °F | 395 °F | 395 °F | 400 °F |
| Pour Point, °F | -20 | -10 | 0 | 0 |
| Rust Protection ASTM D665 | Pass | Pass | Pass | Pass |
| Colour ASTM D1500 | 6 Max | 6 Max | 6 Max | 6 Max |
Hydraulic Oil 68AW
Hydraulic Oil 68AW is a fully formulated premium type oil suitable for severe duty hydraulic service.
Hydraulic Oil 68AW is manufactured from the highest quality anti-wear additives available. It also contains anti-rust, anti-foam and de-emulsifying additives to help extend oil life and protect metal components in severe duty service, where water contamination may be a problem.
Hydraulic Oil 68AW meets or exceeds specifications developed by Cincinnati Milacron, Vickers, Denison and other machine builders.
Typical Analysis
ISO Viscosity Grade: 68
Viscosity @ 40° C: 68 cSt
Viscosity Index: 100
API Gravity: 30.0
Specific Gravity: 0.876
Flash Point COC: 395 °F
Pour Point: 5 °F
Rust Protection ASTM D665 : Pass
Colour ASTM D1500: 4 Maximum
Hydraulic Oil 46AW
Hydraulic Oil 46AW is a fully formulated premium type oil, made from Group II base oil, suitable for severe duty hydraulic service.
Hydraulic Oil 46AW is manufactured from the highest quality anti-wear additives available. It also contains anti-rust, anti-foam and de-emulsifying additives to help extend oil life and protect metal components in severe duty service, where water contamination may be a problem.
Hydraulic Oil 46AW meets or exceeds specifications developed by Cincinnati Milacron, Vickers, Denison and other machine builders.
Typical Analysis
ISO Viscosity Grade: 46
Viscosity @ 40° C: 46 cSt
Viscosity Index: 100
API Gravity: 30.0
Specific Gravity: 0.876
Flash Point COC: 395 °F
Pour Point: 5 °F
Rust Protection ASTM D665 : Pass
Colour ASTM D1500: 4 Maximum
Hydraulic Oil 32AW
Hydraulic Oil 32AW is a fully formulated premium type oil suitable for severe duty hydraulic service.
Hydraulic Oil 32AW is manufactured from the highest quality anti-wear additives available. It also contains anti-rust, anti-foam and de-emulsifying additives to help extend oil life and protect metal components in severe duty service, where water contamination may be a problem.
Hydraulic Oil 32AW meets or exceeds specifications developed by Cincinnati Milacron, Vickers, Denison and other machine builders.
Typical Analysis
ISO Viscosity Grade: 32
Viscosity @ 40° C: 32 cSt
Viscosity Index: 95
Specific Gravity: 0.86
Flash Point COC: 380 °F
Pour Point: 0 °F
Rust Protection ASTM D665 : Pass
Colour ASTM D1500: 4 Maximum