Draw Oil - Environmental 360 Solutions

Draw Oil

Draw Oil

Draw-Oil SYN-HD

Draw-Oil SYN-HD is a 100% synthetic drawing fluid. The product has been formulated for the more severe drawing applications found in industry. However, it can be used very successfully for less severe or light drawing and stamping applications.

Draw-Oil SYN-HD contains a unique blend of extreme pressure additives and special purpose additives. In combination with each other, these new chemical technologies combine to produce a product that will improve productivity, extend emulsion and die life and improve worker environment.

The extreme pressure additives create a unique boundary between the work piece and the die to allow for difficult drawing to take place and reduce the wear on the dies.

The special purpose additives function to give superior corrosion protection, eliminate any foaming and control any bacteria growth. This control of bacteria in the fluid is critical and gives a much healthier work environment for the personnel in the plant.

Depending on the type of draw and the material used in the operation, the concentration would vary from 5% to 15% by volume.

Typical Analysis:

Appearance: Red Liquid
Odour: Mild
Specific Gravity @ 15 °C: 1.1
pH 5%: 8.8
5% Emulsion: Light pink, opaque, good foam
break.
Rust Test (ASTM 4627/86): 5% No Rust, No Stain
Refractometer Reading: 5% = RF 4.5 (Factor 1.1)

Application:

Draw-Oil SYN-HD is recommended for moderate to heavy duty blanking, piercing,
bending and deep drawing applications for single die, multi stage transfer dies and
progressive die applications for mainly ferrous metals. Depending on application,
severity and metal, concentrations between 5% and 15% are recommended.

Draw-Oil 229A

aw-Oil 229A is the highest viscosity drawing oil in our line of wire-drawing compounds. It is sulphur-free and incorporates a package of highly potent additives to provide effective lubricity and anti-weld properties that impart a brighter finish to the wires emerging from the draw-box. Overall, Draw-Oil 229A enables the wire drawing operation to run cooler.

Features:

  • Clear, transparent
  • Improves surface finish
  • High lubricity
  • High viscosity
  • Good wetting
  • Stable indefinitely
  • Good EP characteristics

Typical Data:

Appearance: Viscous, clear, light yellow
Viscosity @ 40°C (cSt.): 1060
Sulphur: Nil
Phosphorus: Nil

Draw-Oil® 70HDS

Draw-Oil 70 HDS was designed as a dual-purpose lubricant. It can be used as such for severe drawing and stamping, and less demanding operations can be handled with water cut-back versions.

Draw-Oil 70HDS is a reddish-brown oil comprising a unique package of powerful synergistic additives. The straight oil is recommended for deep-drawing, fine-blanking, cold heading and extruding operations while lighter duty jobs can be handled with the diluted oil which forms a coarse milky-white emulsion.

Features:

  • clear, stable oil
  • easily applied by drip, spray or brush
  • solvent free – no fumes or fire hazard from vapours
  • readily cleanable from parts
  • prevents stain and corrosion
  • high lubricity
  • dispersible in water in all proportions to form a milky-white emulsion

Typical Data:

Appearance: Clear, Reddish-brown Oil
Viscosity @ 40°C (cSt.): 70
S.G. @15°C: 1.041
Chlorine: Present
Sulphur (Active): Present
Solublility: Dispersible in Water