Chemkool® Products - Environmental 360 Solutions

Chemkool® Products

Chemkool® Products

Chemkool® SB-6C

Chemkool® SB-6C is a transparent, brown, semi-synthetic developed as a dual-purpose fluid for cutting, machining and also drawing and stamping operations.

It provides superior rust protection and was designed with a synergistic mixture of biocides which enhances and prolongs its service life. Chemkool® SB-6C can be readily cut back with water in all proportions to match the degree of severity of the operation. It leaves a virtually invisible film on parts that can be readily cleaned.

Features

  • Excellent corrosion protection
  • Low foaming
  • High resistance to bacterial attack
  • Improves surface finish
  • Miscible with water in all proportions
  • Residue is non-sticky and readily cleanable from parts
  • Good wetting
  • Stable indefinitely

Typical Data

Appearance: Brown, transparent liquid
pH: 9.8
Specific Gravity: 1.043
Chlorine: Present

5% Solution:
Appearance: Yellowish, transparent
pH: 9.3
Foam: Breaks in 15 seconds

Chemkool ® SB-6

Chemkool ® SB-6 is a transparent, brown, semi-synthetic developed as a dual-purpose fluid for cutting, machining and also drawing and stamping operations.

It provides superior rust protection and was designed with a synergistic mixture of biocides which enhances and prolongs its service life. Chemkool ® SB-6 can be readily cut back with water in all proportions to match the degree of severity of the operation. It leaves a virtually invisible film on parts that can be readily cleaned.

Features

  • Chlorine-free
  • Excellent corrosion protection
  • Low foaming
  • High resistance to bacterial attack
  • Improves surface finish
  • Miscible with water in all proportions
  • Residue is non-sticky and readily cleanable from parts
  • Good wetting
  • Stable indefinitely

Typical Data

Appearance: Brown, transparent liquid
pH: 10.0
Specific Gravity: 1.043

5% Solution:
Appearance: Yellowish, transparent
pH: 9.3
Foam: Breaks in 15 seconds

Chemkool® 4002CFC

Chemkool 4002CFC is a biostatic, low foam, semi-synthetic metalworking fluid for machining and grinding ferrous and non-ferrous metals. It is especially effective for aluminum and its alloys.

Chemkool 4002CFC has excellent corrosion “protection” for cast iron, steel, copper, aluminum and its alloys.

Chemkool 4002CFC is formulated with especially selected lubricant additives, which are resistant to microbial growth at recommended levels yet are biodegradable at diluted levels.

Chemkool 4002CFC additionally contains very effective anti-microbial additives,
which not only eliminate bacteria but also fungi and yeast species.
Chemkool 4002CFC contains no sulphur or chlorine.

Typical Data

Appearance: Golden Brown, Clear Liquid
Odour: Mild, Pleasant
Specific Gravity: 1.00
pH 5%: 9.1
5% Emulsion: Greenish, Translucent
Rust Test (ASTM 4627/86): 5% No Rust, No Stain
Stain Test on Aluminum: 5% No Stain
Stain Test on Copper: 5% No Stain

Application

Grinding: 20:1 to 10:1
Machining (Tapping, Chasing,
Threading, Drilling, Broaching): 10:1 to 5:1

To obtain the concentration, multiply the refractometer reading by 2.0.

Chemkool® 4002

Chemkool 4002 is a biostatic, low foam, semi-synthetic metalworking fluid for machining and grinding ferrous and non-ferrous metals.

Chemkool 4002 has excellent corrosion “protection” for cast iron, steel, copper, aluminum and its alloys.

Chemkool 4002 is formulated with specially selected lubricant additives, which are resistant to microbial growth at recommended levels, yet are biodegradable at diluted levels.

Chemkool 4002 additionally contains very effective anti-microbial additives, which not only eliminate bacteria but also fungi and yeast species.

Typical Data

Appearance: Light Brown / Brown, Clear Liquid
Odour: Mild, Pleasant
Specific Gravity: 1.00
pH 5%: 9.1
5% Emulsion: Greenish Brown, Opaque/Translucent
Rust Test (ASTM 4627/86): 5% No Rust, No Stain
Stain Test on Aluminum: 5% No Stain
Stain Test on Copper: 5% No Stain

Application

Grinding: 50:1 to 30:1
Machining (Tapping, Chasing,
Threading, Drilling, Broaching): 30:1 to 10:1

Chemkool® 3002CFC

Chemkool 3002CFC is a biostatic, low foam, semi-synthetic metalworking fluid for machining and grinding ferrous and non-ferrous metals. It is especially effective for aluminum and its alloys.

Chemkool 3002CFC has excellent corrosion “protection” for cast iron, steel, copper, aluminum and its alloys.

Chemkool 3002CFC is formulated with especially selected lubricant additives, which are resistant to microbial growth at recommended levels yet are biodegradable at diluted levels.

Chemkool 3002CFC additionally contains very effective anti-microbial additives, which not only eliminate bacteria but also fungi and yeast species.

Typical Data

Appearance: Reddish Brown, Clear Liquid
Odour: Mild, Pleasant
Specific Gravity: 1.00
pH 5%: 9.1
5% Emulsion: Greenish, Translucent
Rust Test (ASTM 4627/86): 5% No Rust, No Stain
Stain Test on Aluminum: 5% No Stain
Stain Test on Copper: 5% No Stain

Application

Grinding: 50:1 to 30:1
Machining (Tapping, Chasing,
Threading, Drilling, Broaching): 30:1 to 10:1

To obtain the concentration, multiply the refractometer reading by 1.4.

Chemkool® 3002

Chemkool 3002 is a biostatic, low foam, semi-synthetic metalworking fluid for machining and grinding ferrous and non-ferrous metals. It is especially effective for aluminum and its alloys.

Chemkool 3002 has excellent corrosion “protection” for cast iron, steel, copper, aluminum and its alloys.

Chemkool 3002 is formulated with especially selected lubricant additives which are resistant to microbial growth at recommended levels, yet are biodegradable at diluted levels.

Chemkool 3002 additionally contains very effective anti-microbial additives which not only eliminate bacteria but also fungi and yeast species.

Typical Data

Appearance: Reddish Brown, Clear Liquid
Odour: Mild, Pleasant
Specific Gravity: 1.00
pH 5%: 9.1
5% Emulsion: Reddish, Opaque/Translucent
Rust Test (ASTM 4627/86): 5% No Rust, No Stain
Stain Test on Aluminum: 5% No Stain
Stain Test on Copper: 5% No Stain

Application

Grinding: 50:1 to 30:1
Machining (Tapping, Chasing,
Threading, Drilling, Broaching): 30:1 to 10:1

Chemkool® 2005HD

Chemkool 2005HD is a biostatic, severe duty, low foam, semi-synthetic metalworking fluid for machining and grinding ferrous and non-ferrous metals.

Chemkool 2005HD has excellent corrosion protection for steel, copper, aluminum and its alloys.

Chemkool 2005HD is formulated with especially selected lubricant additives which are resistant to microbial growth at recommended levels, yet are biodegradable at diluted levels.

Chemkool 2005HD additionally contains very effective anti-microbial additives which not only eliminate bacteria but also fungi and yeast species.

Typical Data

Appearance: Reddish Brown, Clear Liquid
Odour: Mild, Pleasant
Specific Gravity: 1.03
pH 5%: 8.8
5% Emulsion: Reddish, Opaque/Translucent
Rust Test (ASTM 4627/86): 5% No Rust, No Stain
Stain Test on Aluminum: 5% No Stain
Stain Test on Copper: 5% No Stain

Application

Grinding: 50:1 to 30:1
Machining (Tapping, Chasing,
Threading, Drilling, Broaching): 30:1 to 10:1

Chemkool® 2000C

Chemkool 2000C is a low foaming, biostatic, fully synthetic metalworking fluid for machining and grinding of ferrous and some non-ferrous metals (for Copper and Copper Alloys Chemkool 2000-I should be used).

Chemkool 2000C is formulated with multi-functional chemicals selected for their lubricity & biostaticity properties. Each chemical performs as a biostat, which means it is resistant to microbial growth. These products also double as emulsifiers, rust preventatives, dispersants and buffers.

Chemkool 2000C additionally contains a very effective anti-microbial combination to resist fungal and yeast growth.

Chemkool 2000C does not contain Diethanolamine, Nitrites, Phenolics or Heavy Metals.

Typical Data

Appearance: Blue, clear to slightly hazy liquid
Odour: Mild, Aromatic
Specific Gravity @ 15° C: 1.1
pH 5% Solution: 9.3
Rust Test (ASTM 4627/86): 5% No Rust, No Stain

Chemkool 325SF

Chemkool 325SF is a synthetic coolant designed for the cutting and machining of a variety of metals. It incorporates a unique package of E.P. and boundary additives that confer exceptional lubricating characteristics which are balanced by the superior cooling power of water. It is recommended for the processing of steel and aluminium. Tests have shown it to be non-staining to most aluminium alloys.

Chemkool 325SF is miscible with water in all proportions and the concentration should be adjusted to match the severity of the operation. The synergistic mixture of biocides incorporated in the coolant was intended to prolong service life.

Features:

  • Chlorine and Sulphur free
  • Low foaming
  • Miscible with water in all proportions
  • Light and readily cleanable residue
  • Good wetting
  • Excellent corrosion protection
  • High resistance to bacterial attack
  • Stable indefinitely
  • Excellent lubricating ability

Typical Data

Appearance: Blue, transparent liquid
Specific Gravity: 1.03
Chlorine: Nil
Sulphur: Nil
pH (5% Sol’n in water): 8.5
Foam (low shear): Breaks in 10 seconds